Greetings to all...
I have been looking for a "flattie" project that would grab my attention and just have to built...and I found it...it's pretty straight forward...but there are lots of little parts to cut and fit...about 50 so far...and there are still details to be added...
I'm going to prime and paint the three major sub assemblies as individual parts...then glue together with epoxy or super glue...this will make the detailing much easier...
More later...stay tuned...
Howard...
Horse Car "Flattie"
Horse Car "Flattie"
- Attachments
-
- horse car flattie major sub assemblies in position.JPG (129.74 KiB) Viewed 38663 times
-
- horse car major parts raw cardboard ccf.jpg (259.47 KiB) Viewed 38665 times
-
horse car pattern 08 26 2021.pdf- Open this PDF to see the image i used for inspiration and the rather rough pattern.
- (710.63 KiB) Downloaded 1858 times
View my Little Glitter House Photo Album
https://photos.google.com/share/AF1QipO ... x5Mm9MTFd3
https://photos.google.com/share/AF1QipO ... x5Mm9MTFd3
Re: Horse Car "Flattie"
Update...09-04-2021...
Finished...somewhere around 60 or so parts all together...a lot more than I thought it would ever be...I added the 1/32" wide gold tape to the major features on the horse car to give the white more contrast with the snow on the base...and a hint of light blue paint on the snow base under the glitter for more contrast...
Howard...
Finished...somewhere around 60 or so parts all together...a lot more than I thought it would ever be...I added the 1/32" wide gold tape to the major features on the horse car to give the white more contrast with the snow on the base...and a hint of light blue paint on the snow base under the glitter for more contrast...
Howard...
- Attachments
-
- DSCN0098-001.JPG (133.33 KiB) Viewed 38545 times
View my Little Glitter House Photo Album
https://photos.google.com/share/AF1QipO ... x5Mm9MTFd3
https://photos.google.com/share/AF1QipO ... x5Mm9MTFd3
Re: Horse Car "Flattie"
Howard this is really marvelous!
