Greetings to all…

It’s a brand new year and time to start a new project…this one is my version of a vintage candy box house I saw during an internet image search…

The original had a flat base, a printed picture of Santa and a tired looking sprig of holly attached to the front…my version has a thicker, house-type base, a berry topped tree made from a short piece of craft store item identified as “Artificial Canadian Pine Pipe Cleaner Wired Stems 12” x 20mm” plus the Santa figure I posted in November…here’s the link on how to make the figure… https://www.cardboardchristmas.com/foru ... =35&t=2269

This project also uses one of the reproduction stick-on doors from Pete Oehmen…it’s Number SO-1g…here’s a link to his site… http://www.cardboardputzhouses.com

The pattern sheets are below the picture of the three major parts…I’ll post the brick graphics soon…plus pictures of the completed project…stay tuned…

Howard

Here is a PDF for red brick graphics...but don't feel locked into the one I used...an internet search of "printable brick graphics" will yield other patterns...

UPDATE...1/3/2024...

Pictures of the finished project are below...the texture on the roof is birdcage gravel mixed in with the paint...hope you'll post pictures of your version...stay tuned for another new project in several weeks...

Howard...

Hi everyone!!

Here is my version of the triangular candy box.

The santa is a vintage piece. The treee is made from 2 small bottle brush trees that were first bleached and trimmed to size. I then painted them and twisted them together. The wires are wrapped in floral tape.