https://www.cardboardchristmas.com/forums/ |
|
Glass Electric Houses https://www.cardboardchristmas.com/forums/viewtopic.php?f=12&t=1493 |
Page 1 of 1 |
Author: | SallyL [ Mon Jan 22, 2018 3:09 pm ] | |||
Post subject: | Glass Electric Houses | |||
I have these Made in Japan 1950s Putz like houses that I'd like to spruce up a bit. There are minor repairs needed to the buildings and the light up trees. Does anyone have any info of the trees in particular? They are covered in clear glass bits that aren't beads.
|
Author: | SallyL [ Mon Jan 22, 2018 3:42 pm ] | ||||
Post subject: | Re: Glass Electric Houses | ||||
Hopefully smaller, cropped images.... sorry so HUGE !
|
Author: | maria [ Wed Jan 24, 2018 8:31 pm ] | ||
Post subject: | Re: Glass Electric Houses | ||
Here's one of mine--when I got it it was filthy--the Santa and deer were grey! I used a q-tip with plain water and gingerly cleaned them over several days--be forewarned about the paint on the glass portions---sometimes it is not waterproof! Also be forewarned about the cardboard sleeve that goes over the bulb---it can burn! Use a blinking bulb if you can.
|
Author: | PutzinVT [ Wed Jan 24, 2018 11:43 pm ] |
Post subject: | Re: Glass Electric Houses |
I built a repro 2 years back. It had the same kind of tree. viewtopic.php?f=2&t=1151&p=7699&hilit=led+house#p7690 To avoid heat. I used a C7 size LED bulb. Runs cool, no threat of heat cooking the tree. Steve |
Author: | maria [ Thu Jan 25, 2018 9:11 am ] |
Post subject: | Re: Glass Electric Houses |
Wow I forgot about that! Thanks! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://phpbb.com/ |