https://www.cardboardchristmas.com/forums/ |
|
Making a replica Santa for a candy box house https://www.cardboardchristmas.com/forums/viewtopic.php?f=14&t=1658 |
Page 1 of 1 |
Author: | Laurie [ Tue Dec 18, 2018 3:20 pm ] |
Post subject: | Making a replica Santa for a candy box house |
My first task was to paint the Santa face with matte finish chalk paint. I then took a pipe cleaner and bent it into a figure shape with a neck, arms, torso and legs. Depending on the head size, the body is about 2 or 3 head lengths. In this case, with a larger size head I made the body 2 head lenths long. I the covered the neck, torso and legs with floral tape which I wrapped tightly on. The legs were painted with black acrylic paint. I glued the head to the neck and when it was securely attached I covered the body in tacky glue and folded over a piece of red wool roving, cut a tiny slit in the fold and slipped it over Santa’s head, attaching it to the glue on the body. I kind of squeezed the roving around the arms and torso and trimmed the extra as needed. Attachment: D020B84E-8E54-4384-A406-296D365037F8.jpeg [ 181.07 KiB | Viewed 8323 times ] Attachment: 9E1D8D0E-85A1-4185-B42F-5167081EC67D.jpeg [ 40.06 KiB | Viewed 8323 times ] Attachment: 02C4F4C0-0687-4EFF-A93F-42D7BA5AA415.jpeg [ 39.06 KiB | Viewed 8323 times ] |
Author: | Laurie [ Tue Dec 18, 2018 3:35 pm ] |
Post subject: | Re: Making a replica Santa for a candy box house |
The next step was to tear off a tiny piece of white roving and attach it as a beard, trimming to shape it. I painted another piece of floral tape for the belt and glued it around Santa’s waist, shaping the roving as I went around. Trim off excess red roving at the bottom of Santa’s suit. The trickiest part for me was the hat. I rolled a thin piece of white roving into a rope shape and glued it along the edge of a small square of red roving which I then glued to the top of the head. (See pic of dutch like hat.) After it was thoroughly dry and attached, I started shaping the hat by pushing up on the back and pulling the white trim all the way around the back and gluing it in place. I then trimmed off the excess red roving from under the white trim. I hope this helps some - it was a lot of trial and error for me, as well a lot of gluing and shaping of the roving. I don’t think there is a standard or ‘right’ way to make the Santa. Attachment: F4ADCCAB-9E78-491C-8F0C-3F1EC90F49D1.jpeg [ 41.34 KiB | Viewed 8322 times ] Attachment: 1E581CA8-8691-4C6A-A184-C87324586A2D.jpeg [ 47.5 KiB | Viewed 8322 times ] Attachment: 0CCF5A75-132B-42A1-AB37-B34AECB5BD6D.jpeg [ 35.03 KiB | Viewed 8322 times ] |
Author: | Laurie [ Tue Dec 18, 2018 3:38 pm ] |
Post subject: | Re: Making a replica Santa for a candy box house |
Finished candy box Santa: I made shorter legs to match the Santa I was replicating, i have made longer legs too. Attachment: AB4A6101-A3C4-45A0-8ADF-52FF57AF5DF9.jpeg [ 39.56 KiB | Viewed 8322 times ] |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://phpbb.com/ |