https://www.cardboardchristmas.com/forums/
Horse Car "Flattie" https://www.cardboardchristmas.com/forums/viewtopic.php?f=14&t=2036	Page 1 of 1

---

Author:	Howard [ Sat Aug 28, 2021 7:59 am ]
Post subject:	Horse Car "Flattie"
Greetings to all... I have been looking for a "flattie" project that would grab my attention and just have to built...and I found it...it's pretty straight forward...but there are lots of little parts to cut and fit...about 50 so far...and there are still details to be added... I'm going to prime and paint the three major sub assemblies as individual parts...then glue together with epoxy or super glue...this will make the detailing much easier... More later...stay tuned... Howard... Attachments: horse car flattie major sub assemblies in position.JPG [ 129.74 KiB | Viewed 10641 times ] horse car major parts raw cardboard ccf.jpg [ 259.47 KiB | Viewed 10643 times ] File comment: Open this PDF to see the image i used for inspiration and the rather rough pattern. horse car pattern 08 26 2021.pdf [710.63 KiB] Downloaded 647 times

---

Author:	Howard [ Sat Sep 04, 2021 6:48 pm ]
Post subject:	Re: Horse Car "Flattie"
Update...09-04-2021... Finished...somewhere around 60 or so parts all together...a lot more than I thought it would ever be...I added the 1/32" wide gold tape to the major features on the horse car to give the white more contrast with the snow on the base...and a hint of light blue paint on the snow base under the glitter for more contrast... Howard... Attachments: DSCN0098-001.JPG [ 133.33 KiB | Viewed 10523 times ]

---

Author:	maria [ Mon Sep 06, 2021 3:46 pm ]
Post subject:	Re: Horse Car "Flattie"
Howard this is really marvelous!

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group http://phpbb.com/