Let's talk about cardboard Christmas houses and accessories

Visit our Contributors' Pages:
Visit Family Christmas Online Visit Howard Lamey's own web page, LittleGlitterHouses.com Click to Sign Up for Maria Cudequest's Collectibles Blog
Visit Family Christmas Online Click to visit Papa Ted's Place - the ultimate cardboard Christmas house resource. Click to return to the Old Christmas Tree Lights Table of Contents Page



Note: To ask a question, sign up for our "Christmas Times" newsletter, or learn how
to apply for membership to this forum, please visit our Contact page.


Note: All content on this forum is Copyright (c) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 by Paul D. Race
and by the posters who have contributed specific content. All material is for your personal use only. No content
or plans may be republished or sold, nor may any plans be used to make products to sell without prior written
permission from Paul D. Race and the individual who contributed the content or plan in question.
For permissions or questions about this policy, please contact us using our Contact page.
It is currently Thu Mar 28, 2024 4:05 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Fri Apr 19, 2013 11:13 am 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Hi everyone. I'm about to get started on the molds. Had no time all week and we were very worried about a friend of ours who was running in Boston (she's fine)--and I've been a bit anxiety ridden about my loved ones being in crowded situations--that's passed--so I'll let you know how the wood putty works out soon


Top
 Profile  
Reply with quote  
PostPosted: Sat Apr 20, 2013 7:09 pm 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Argh. Still haven't managed to find the time for this mold. Hopefully tomorrow.


Top
 Profile  
Reply with quote  
PostPosted: Sun Apr 21, 2013 3:34 pm 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Hello everyone. Well so far this is a bit disappointing; it turns out the mold is simply plaster--not happy about that as degradation has already begun and I am losing crispness. It also turns out these are meant for porcelain slip although some people use these molds for polymer clay; I've used the clay and that works well enough but I can already see some degradation of the mold's finer details. Hot glue works the best but as you all know, hot glue is unstable. The wood putty I would not use again.

So I'll keep trying and let you know. i really thought that the mold would be something stronger i.e. more permanent. I'll come back to this next week.


Top
 Profile  
Reply with quote  
PostPosted: Sun Apr 21, 2013 5:30 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 02, 2011 4:27 pm
Posts: 1678
How disappointing to spend $55 on something and discover that it's a plaster cast that breaks down if you use anything other than "porcelain slip." There's a note on the home page about contacting them BEFORE you order if you're not planning on using porcelain slip. I wonder what they say? Thanks for the report. - Paul


Top
 Profile  
Reply with quote  
PostPosted: Sun Apr 21, 2013 7:43 pm 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Wow you found that. I didn't so perhaps it's my fault. It was $45 by the way. Oh well, I am getting some casts that aren't too bad.

Such is life. The quest continues. Next time--a silicone mold perhaps.

By the way they did indicate that had I told them I would not be using porcelain slip, I would have gotten a mold a little harder...oh well, next time I won't let my excitement get ahead of me...all and all though, disappointing


Top
 Profile  
Reply with quote  
PostPosted: Tue Apr 23, 2013 8:43 am 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Well it took some work but I have cast my own molds from the mother mold before it deteriorates any further--I made these molds using hot glue and it's almost impossible to shoot with any detail so I won't bother posting pix. Today I'll start casting using these hot glue molds--and put the "mother mold" away for now.

Hope to pour some figures later--trying the wood putty again.


Top
 Profile  
Reply with quote  
PostPosted: Tue Apr 23, 2013 9:15 am 
Offline

Joined: Tue Nov 15, 2011 10:11 am
Posts: 304
Sorry about the disappointment with the molds. Good luck with the next the batch!!! Will be interested in the result.


Top
 Profile  
Reply with quote  
PostPosted: Thu Apr 25, 2013 11:21 pm 
Offline

Joined: Fri Sep 16, 2011 7:32 pm
Posts: 2336
Let it suffice to say all the fine details were gone. You live and learn.


Top
 Profile  
Reply with quote  
PostPosted: Mon May 13, 2013 7:19 pm 
Offline

Joined: Tue Nov 01, 2011 11:05 am
Posts: 447
Back to the drawing board on these. The originals likely WERE plaster BUT the technique was a bit different as they would have PRESSED wet clay (not slip) into the molds. This would have been simple fire clay - like what old bricks are made of. Two piece molds would have been as complicated as they would have gotten. Often simply one piece molds. The wet clay would have been fired. Have you tried pressing Sculpty into the mold and oven baking the result? I think this might work and make a VERY durable figure. I have made molds from the Sculpty and from Latex silicone rubber like they use in automotive applications for gasket cement. Also it is used for bathroom caulking. It is genuine rubber BUT you want to apply it in several thin layers so that it will set up on the inside. Put a hole lot on the outside and it takes FOREVER to cure. The little setting bulldog I made from Sculpty and made the mold out of black silicone rubber. It has worked well. I took a sharp knife and split the rubber mold up the back to get it off of the dog.
The first molds I made were plaster and they do loose detail quickly using Durham's rock hard putty because it is just a VERY durable form of plaster and sets up the same way. HOWEVER a bit of caution, if you use this product be SURE and remove it from the mold before it gets TOO set up as it will be VERY hard to remove. Using this product the plaster molds do deteriorate quickly. I bought one of those molds but haven't used it as The seller was going to give me the name of a suppler of a product to use as mold release but she never got the info to me. I have used lard or Crisco but that leaves something to be desired. I think I will get some Sculpty and try my mold after I get out of the hospital. Tom


Top
 Profile  
Reply with quote  
PostPosted: Mon May 13, 2013 8:55 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 02, 2011 4:27 pm
Posts: 1678
Tom,
Thanks for keeping up with so many threads. Here's a prayer for smart doctors and fast healing.

Paul


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron




Click to see sturdy Lionel(r) trains that are perfect for your Christmas tree.



Note: To ask a question, sign up for our "Christmas Times" newsletter, or learn how
to apply for membership to this forum, please visit our Contact page.


Note: All content on this forum is Copyright (c) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 by Paul D. Race
and by the posters who have contributed specific content. All material is for your personal use only. No content
or plans may be republished or sold, nor may any plans be used to make products to sell without prior written
permission from Paul D. Race and the individual who contributed the content or plan in question.
For permissions or for questions about this policy, please contact us using our Contact page.



Visit our affiliated sites:
- Christmas Memories and Collectibles -
Visit the FamilyChristmasOnline site. Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Visit Papa Ted Althof's extensive history and collection of putz houses, the largest and most complete such resource on the Internet.. Click to return to the Old Christmas Tree Lights Table of Contents Page Click to sign up for Maria Cudequest's craft and collectibles blog.
Click to visit Fred's Noel-Kat store.
- Family Activities and Crafts -
Click to see reviews of our favorite family-friendly Christmas movies. Free, Family-Friendly Christmas Stories Decorate your tree the old-fashioned way with these kid-friendly projects. Free plans and instructions for starting a hobby building vintage-style cardboard Christmas houses. Click to find free, family-friendly Christmas poems and - in some cases - their stories. Traditional Home-Made Ornaments
- Trains and Hobbies -
Visit Lionel Trains. Free building projects for your vintage railroad or Christmas village. Click to see Thomas Kinkaded-inspired Holiday Trains and Villages. Big Christmas Train Primer: Choosing and using model trains with holiday themes Building temporary and permanent railroads with big model trains Click to see HO scale trains with your favorite team's colors.
- Music -
Carols of many countries, including music, lyrics, and the story behind the songs Wax recordings from the early 1900s, mostly collected by George Nelson.  Download them all for a 'period' album.
Best-loved railroad songs and the stories behind them.
Heartland-inspired music, history, and acoustic instrument tips. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable.



Click to trains that commemorate your team!

Powered by phpBB® Forum Software © phpBB Group