I’m certain you’ve seen fences around Christmas trees and winding through villages…some are very refined and neatly painted…this particular design is more rustic…the construction couldn’t be simpler…I’ve just put this short length together to show you how it’s done…
It’s made from 11” long twigs (about 3/8” in diameter) and jumbo paper clips that hold it together…the most important detail is drilling 1/16” diameter holes through the twigs 9” apart…
You can make the twigs longer or shorter…(I think shorter is better than longer)…just adjust the distance between the holes…example…9” long--holes 7” apart…10” long--holes 8” apart…12” long--holes 10” apart…
The fence can be assembled into a complete circle or one continuous length…if you make one long length, install 2” sections of twigs at each end…these have a single 1/16” diameter hole drilled through them…the advantage of one continuous length is that it fold for compact storage…
The tools, materials and details are show below…yes…pictures are worth thousands of words…
Enjoy this project!…and post some pictures of your fence…
My very best regards…Howard
(PS…now that you’ve struggled through this very rough project outline…you can see just how much I wish I had Paul’s “magic with words” and professional writing skills)
| Attachments: |
|
twig fence.jpg [ 574.4 KiB | Viewed 14086 times ] |
