greetings to all…
here’s a large “glitter house” i recently completed for a client…the actual house, built in 1890, is located in the great lakes area near the canadian border…
i worked from a series of over 50 different photographs of the property… it is also more “architecturally accurate” than most “glitter houses” I’ve built in the past…most features had to be selectively condensed and compressed in order to build it in a manageable size for display…
the base measures 9” x 13 3/4”…it is 8 1/2” tall including the base…there are 41 windows, 3 doors and around 20 pieces of shrubbery…
it is fully illuminated with six 5mm diameter “warm white” 12-volt LED lights powered by a plug-in wall unit similar to a cell phone charger…the off/on switch is disguised as the top of the air conditioner at the rear of the house on the porch side…
the entire interior of the house is also painted white to reflect and direct as much light as possible through all the windows and doors…
this is also the first piece i have done that is completely finished, detailed and landscaped on all four sides…
my very best regards…
howard…
| Attachments: |
|
G G ccf 1.jpg [ 172.72 KiB | Viewed 14748 times ] |
|
G G ccf 2.jpg [ 163.85 KiB | Viewed 14748 times ] |
|
G G ccf 3.jpg [ 185.44 KiB | Viewed 14748 times ] |
