https://www.cardboardchristmas.com/forums/ |
|
Simple Skating Pond https://www.cardboardchristmas.com/forums/viewtopic.php?f=4&t=1506 |
Page 1 of 1 |
Author: | BurghGal [ Wed Jan 31, 2018 8:23 pm ] |
Post subject: | Simple Skating Pond |
I'm thinking my little Putz town could use a skating pond and I wondered what would be an easy one to do. When I was a kid, my Dad used a pocket mirror and that was the pond! Any ideas on making a small, simple skating surface would be appreciated. |
Author: | Barb [ Wed Jan 31, 2018 9:16 pm ] |
Post subject: | Re: Simple Skating Pond |
I recently borrowed Howard's use of waxed paper crumpled up and then smoothed over and glued down to a mirror for a skating pond. I gave the edges of the pond some curves with built up snow flakes. Fun, easy and looks pretty good! |
Author: | BurghGal [ Thu Feb 01, 2018 10:04 am ] |
Post subject: | Re: Simple Skating Pond |
Perfect! Well within my capabilities. |
Author: | Howard [ Thu Feb 01, 2018 11:20 am ] |
Post subject: | Re: Simple Skating Pond |
take a look here...what Lynn did...https://www.cardboardchristmas.com/forums/viewtopic.php?f=2&t=1406 |
Author: | BurghGal [ Thu Feb 01, 2018 3:56 pm ] |
Post subject: | Re: Simple Skating Pond |
Again, thanks! Wax paper, here I come! |
Author: | Laurie [ Sun Feb 04, 2018 12:50 pm ] |
Post subject: | Re: Simple Skating Pond |
I use a small piece of thin stainless steel and just put loose 'snow' around the edges. |
Author: | maria [ Sun Feb 04, 2018 6:53 pm ] |
Post subject: | Re: Simple Skating Pond |
Sometimes I'll cut heavy duty aluminum foil into the shape I want, glue it to cardboard---dust with glitter...the edges I work up with hot glue and sprinkle glitter on the glue while it's still wet. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://phpbb.com/ |