A member here asked about using an arbor press for cutting out windows and doors. I wrote a blog post about it, but I'll also post the essential information here for those who are interested. The arbor press I bought cost somewhere between $40-60 from Harbor Freight tools, I don't really remember. I've been using it for about 2 years, I think. The set of 39 dies some of which are very close to the standard sizes of windows and doors for Putz houses can be found for as low as $9. I figure you could also find an arbor press or drill press at a garage sale for much cheaper.
The other thing you need is a plastic cutting board and a way to support the cutting board. My brother made me a plywood stand that supports. That's it.
I think the photos tell the story pretty well.
Let me know what you think or if you have any questions. I really think as a putz-making tool it is absolutely worth it.
More photos on my blog - https://paperglitterglue.com/make-putz-house-windows/
Take care. Lucy
| Attachments: |
|
File comment: Arbor press in the plywood stand my brother made for me. IMG_5297.jpg [ 40.54 KiB | Viewed 11213 times ] |
|
File comment: Arbor press with the cutting board and die in place ready for cutting IMG_5302.jpg [ 37.85 KiB | Viewed 11213 times ] |
|
File comment: Hole cut out and the die with the cardboard in the middle IMG_5308.jpg [ 35.38 KiB | Viewed 11213 times ] |
|
File comment: Die to cut windows IMG_5309.jpg [ 40.83 KiB | Viewed 11213 times ] |
|
File comment: I like this size window die because it works so well with the commercial dies for window frames IMG_5310.jpg [ 35.68 KiB | Viewed 11213 times ] |