https://www.cardboardchristmas.com/forums/

PUNCH DIES FOR WINDOWS & DOORS
https://www.cardboardchristmas.com/forums/viewtopic.php?f=4&t=906
Page 3 of 3

Author:  Lucy [ Sun Aug 16, 2015 9:33 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Pete,
We had no idea what was involved in making these dies. I did not mean to be diminish the work involved. We're happy to pay a fair price for them. We want these dies. I've been looking all over for something like this. Just let us know what a set would cost. We'll be ordering them.

Author:  paulrace [ Fri Sep 04, 2015 1:44 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Pete, et al, I have restored the photos of the dies that were "mislaid" during the site migration. I apologize for the inconvenience, and I am still fascinated by these and their potential.

Author:  Pete R.Oehmen [ Thu Oct 01, 2015 5:56 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

A STANDARD SET... at lease for now. I have added the standard "Large Door" to go with the "Small Door". And we already had the 2 most common window openings. As requested bu Lucy and Lee I have added the most common "Arched Window". The "Arched Window" accommodates the WM-3 Mullion as well as CEL-4 and CEL-4s. (see Photos). The dies are $25.00 each or the complete set of 5 for $120.00. Remember for the same price I will build you a die to your specifications.

Attachments:
DSCN7944 B.JPG
DSCN7944 B.JPG [ 651.04 KiB | Viewed 18968 times ]
DSCN7939 B.JPG
DSCN7939 B.JPG [ 389.31 KiB | Viewed 18968 times ]
DSCN7948 B.JPG
DSCN7948 B.JPG [ 443.36 KiB | Viewed 18968 times ]

Author:  Pete R.Oehmen [ Thu Oct 01, 2015 5:58 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

The "Arched Window" die with the CEL-4 window.

Attachments:
DSCN7945 B.JPG
DSCN7945 B.JPG [ 570.02 KiB | Viewed 18968 times ]

Author:  Clinton [ Thu Oct 01, 2015 7:35 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Very nice Pete! I'm gonna save my change to get this set a.s.a.p. This is wonderful. Now I don't have to wrap up my bleeding fingers after a few cuts with the X-acto!.. ;)

Author:  Lee [ Fri Oct 02, 2015 4:31 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

I'm with Will, I need to look at my budget but I do want this set!

Author:  paulrace [ Sun Oct 04, 2015 8:37 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

They sure make a nice cut. Very authentic looking. Probably very close to what the Japanese builders used back in the 1920s and 1930s.

Author:  DonaldD [ Wed Nov 30, 2016 1:07 am ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Pete I would be interested in a set but can't seem to find a email address to send you a PM.

Author:  Lucy [ Thu Dec 01, 2016 2:19 am ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Donald,
This is the email I have used before and it's the one listed under Pete's place - oehmen@sbcglobal.net. I think it works. I have these dies and they make life so much easier. I am very happy with them.

Lucy

Author:  DonaldD [ Sat Dec 03, 2016 2:17 pm ]
Post subject:  Re: PUNCH DIES FOR WINDOWS & DOORS

Thank you. Good to know.

Page 3 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://phpbb.com/