Bow Roof House -- another "Pack-O-Fun" size house...
Posted: Tue Jan 24, 2017 7:57 am
Good morning to all…
I really like small houses that fit in with the other “Pack-O-Fun” houses I’ve made over the last year or so…now, here’s another one…
I’ll let the pattern sheet and photos tell the story...other than to mention a couple of things...
Pre-bend the “bow” in each roof section before trying to glue it to the house body…I pre-bent mine by wrapping around a bloom handle…
In addition to clothespins and paper clamps, I used gift wrap tape to temporally hold the multiple little glue tabs on the edge of the body in place while the glue dried…the tape was removed before attaching the roof…
If there are any questions…let me know…
My very best regards…
Howard…
I really like small houses that fit in with the other “Pack-O-Fun” houses I’ve made over the last year or so…now, here’s another one…
I’ll let the pattern sheet and photos tell the story...other than to mention a couple of things...
Pre-bend the “bow” in each roof section before trying to glue it to the house body…I pre-bent mine by wrapping around a bloom handle…
In addition to clothespins and paper clamps, I used gift wrap tape to temporally hold the multiple little glue tabs on the edge of the body in place while the glue dried…the tape was removed before attaching the roof…
If there are any questions…let me know…
My very best regards…
Howard…
It's fun to see them lit up at the end too!!