Another project
Posted: Tue Sep 28, 2021 9:10 pm
So I took Howard's windmill plans and made my own.
See Here:
https://cardboardchristmas.com/forums/v ... ill#p12990
I also animated the blades with an RC plane servo and a small control board.
It also is run off of a USB cable.
I added some LED's in the house also.
I have shared a google drive link for people to view it.
Takes a minute or two to load.
If ppl are interested I can share where I got the servo and the control board.
It does require a small knowledge of electronics to pull off.
https://photos.app.goo.gl/B4VtRnWU8dMJjVbo8
Steve
See Here:
https://cardboardchristmas.com/forums/v ... ill#p12990
I also animated the blades with an RC plane servo and a small control board.
It also is run off of a USB cable.
I added some LED's in the house also.
I have shared a google drive link for people to view it.
Takes a minute or two to load.
If ppl are interested I can share where I got the servo and the control board.
It does require a small knowledge of electronics to pull off.
https://photos.app.goo.gl/B4VtRnWU8dMJjVbo8
Steve